Xantrex Technology XTR 850 Watt - Manual (Page 222)

A-14 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
SCPI Command Summary
The SCPI commands supported by this programmable power supply are described in the
tables in the remainder of this section. These tables use the following column headings:
• Function The commonly used name for the function.
• SCPI Command The full command in long form.
• Description Explains what the command does or what is affected by it.
• Query? Indicates whether the unit supports a query version of the listed command. N/A
indicates Not applicable. (The command has no query form and will respond with an error
if queried.)
Table A-1 IEEE 488.2 Commands
Function SCPI Command Description
Parameter and
Range
Query
Select
Address *ADR Select the power supply unit
to communicate with. ?| Yes
Clear Status *CLS
[:]STATus[]:CLEAr
Clears all the status data
structures. N/A
Query the
Error Queue *ERR Query the Error Queue for
the oldest error event.
Standard
Event Status
Enable Query *ESE?
[:]STATus[]:STANdard:ENABle
Query the Standard Event
Status Enable register
settings. Yes
Standard
Event Status
Enable *ESE
[:]STATus[]:STANdard:ENABle
Set the Standard Event
Status Enable Register bits. 255)> N/A
Standard
Event Status
Register
Query *ESR?
[:]STATus[]:STANDard[:EVENt]?
Query the Standard Event
Status Register (SERS). Yes