Xantrex Technology XTR 850 Watt - Manual (Page 229)

SPC
I Co
mmand T
ree
975-0200
-01-01
A-21
A
Table A-5 SCPI Commands to Clear All Protection Mechanisms
Function SCPI Command Description
Parameter and
Range
Query
Clear Output
Protection [:]OUTPut[]:PROTection:CLEar Clears the currently set
alarms. N/A
Table A-6 SCPI Commands for Foldback Protection
Function SCPI Command Description
Parameter and
Range
Query
Set Output
Foldback
Delay [:]OUTPut[]:PROTection
:FOLDback:DELay
Set the delay time (seconds)
before foldback protection
is triggered. ?| Yes
Set Output
Foldback
Mode [:]OUTPut[]:PROTection
:FOLDback[:MODE]
Select condition for
foldback. ?|CV|CC|NONE Yes
Table A-7 SCPI Commands for Power
Function SCPI Command Description
Parameter and
Range
Query
Shutdown
Logic Control [:]OUTPut:POLarity Sets the TTL level that will
trigger an External
Shutdown. ?|HIGH|LOW Yes
Main Output
Control [:]OUTPut[:POWer][:STATe] Control Main Output State
(Enable/Disable) ?|ON|OFF Yes
Power On
Main Output
Control [:]OUTPut[:POWer]:PON[:STATe] Control Main Output
Autostart State (Enable/
Disable) ?|ON|OFF Yes
Aux Output
Control [:]OUTPut:AUXilliary[:STATe] Control Aux Output State
(Enable/Disable) ?|ON|OFF Yes