ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 99)

VSG-1000 Vantage Service Gateway
Configuration and Firmware Maintenance 14-3
Figure 14-5 Web Configurator: Firmware Upgrade
Step 4. Enter the IP address of the computer running the TFTP server in the TFTP Server IP Address field.
Step 5. Specify the name of the firmware file in the Filename field and click Apply to start the file transfer
process.
Step 6. When the file transfer is completed successfully, a “ TFTP Downloading 100%” message displays and
the VSG automatically restarts.
Figure 14-6 Web Configurator: Firmware Upgrade Successful
Step 7. After the VSG finishes restarting, access the web configurator again. Check the firmware version number
in the login screen.
14.4 Configuration File Maintenance
You can only use the web configurator to perform configuration file backup and restore.
WARNING!
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENTLY DAMAGE
YOUR DEVICE.
14.4.1 Backup Configuration
Backup is highly recommended once your VSG is functioning properly.
Step 1. Run a TFTP server program on a computer and specify the location for saving the configuration file and
set the communication mode.
Step 2. From the Main Menu screen, click Utilities and Import/Export Configuration. A screen displays as
shown next.