ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 87)

VSG-1000 Vantage Service Gateway
The SMT 12-1
This chapter introduces the operation of the SMT.
12.1 Introduction to the SMT
The System Management Terminal (SMT) is a menu – driven interface that you use to configure the VSG. Access
the SMT using the console port.
Use the SMT to set general system settings and upgrade firmware. For advanced configuration, use the embedded
web configurator (refer to the chapters on web configuration).
12.1.1 Establishing a Console Port Connection
After the VSG is directly connected to a computer using the console port, turn on the computer and run a terminal
emulation program (for example, Hyper Terminal in Windows) and configure its communication parameters as
follows:
9600 bits per second.
Parity none, 8 data bits, 1 stop bit, flow-control none.
Figure 12-1 HyperTerminal Communication Parameter Settings Example
12.2 SMT Login Screen
Press [ENTER] to display the login screen. For your first login, enter the default user name “admin” and default
password “1234” and then press [ENTER].
The user name and password are case sensitive.
Chapter 12
The SMT