ZyXEL Communications ZyXEL Vantage VSG-1000 User Manual

Page 43

VSG-1000 Vantage Service Gateway

System Configuration

4-9

Table 4-6 System Configuration

LABEL DESCRIPTION

Public Address List

Specify the beginning and ending IP addresses of the address pool in the fields provided.

You can configure up to five address pools on the VSG.

Make sure the total number of addresses in the address pool does not

exceed 50.

The following shows three NAT pool examples if the VSG is using a WAN public IP address of
211.21.21.1:
Group 1: 211.21.21.2 ~ 211.21.21.6 (five IP addresses)
Group 2: 211.21.21.20 ~ 211.21.21.29 (ten IP addresses)
Group 3: 211.21.21.60 ~ 211.21.21.69 (ten IP addresses)
Group 4: 211.21.21.75 ~ 211.21.21.76 (two IP addresses)

Apply

Click Apply to save the changes back to VSG and go back to the Utility Menu.

Clear

Click Clear to start configuring this screen again.

Home

Click Home to go back to the Main Menu screen. The changes you made will not be saved if you
have not clicked Apply.

Click Previous to go back to the previous screen. The changes you made will not be saved if you
have not clicked Apply.

The following table describes the system logs you may select in the System Configuration screen.

Table 4-7 Syslog Description

TYPE LOG

FORMAT

DESCRIPTION

System Boot Notice

Date/Time)(SystemName)(Id, Mac Address)(System Up)

This log is sent every time the
VSG reboots successfully.

System Information

(Id, Mac Address) (System Uptime, 0 days 00h:04m:00s,
System IP 120.1.1.1, System name,) (Logged-in Users,
Number of logged-in users, Start Number, End number)
(Username, user IP, user MAC)(…)(…)

A log with system and
currently logged-in user
information is sent every time
interval specified.
Default time interval is 60
minutes.

System Manager Activity
Information

(Date/Time)(SystemName)(Id, Mac Address) (System
Manager Activity Information, Username, User IP,
Status)Username : Administrator | Account
ManagerStatus : Login | Logout | Idle Time Out | Login
Fail

This log records the access
information of a system
account (administrator or
account manager).

NAT Pool Exhausted
Notice

(Date/Time)(SystemName)(Id, Mac Address)(NAT Pool
Exhausted, type)
Type: IP / Port

This log is sent when all
public WAN IP address(es) is
used for VPN NAT.