ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 91)

VSG-1000 Vantage Service Gateway
System Configuration Using the SMT 13-5
This chapter shows you how to set general system settings, view current configuration and perform
system maintenance.
13.1 About SMT System Configuration
Refer to the System Configuration chapter for background information.
13.2 Setting System Configuration
From the main menu, type 1 and press [ENTER] to display the System Configuration menu.
Figure 13-1 SMT: System Configuration
The following table describes the fields in this screen.
Table 13-1 SMT: System Configuration
FIELD DESCRIPTION
System Name Enter a descriptive name for identification purposes.
Console Port
Speed Enter 9600, 19200 or 38400 to set the console port speed. The default setting is 9600.
If you change the console port speed, make sure you also make the same
change to the terminal emulator software.
Auto Logout Timer Specify how many minutes (between 0 and 60) the SMT session can be left idle before the session times
out. The default is 10 minutes. After it times out you have to log in with your password again. Very long
idle timeouts may have security risks.
A value of "0" means a management session never times out, no matter how long it has been left idle (not
recommended).
This does not apply to the web configurator.
Chapter 13
System Configuration Using the SMT
System Configuration
SystemName :VSG-1000
Console Port Speed :9600
Auto Logout Timer :10
WAN Configuration
WAN Mode? (D/S) :S
IP Address :192.168.1.1
Subnet Mask :255.255.255.0
Gateway :192.168.1.254
Web Server Port :80
DHCP Configuration
DHCP Service? (D/R/S) :S
Server IP Address :10.59.1.1
Start IP Address :10.59.1.2
End IP Address :10.59.1.253
Subnet Mask :255.255.255.0
Lease Time :300
E-Mail Server IP Address :
Primary DNS IP Address :168.95.1.1
Secondary DNS IP Address :
Enter WAN IP address