ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 55)

VSG-1000 Vantage Service Gateway
Local Subscriber Management 6-1
This chapter shows you how to set up subscriber accounts on the VSG when using the Built-in
Authentication management type.
6.1 Introduction
When you select the Built-in Authentication management type in the Subscriber Control screen, the subscriber
account and/or accounting (or billing) information is stored in the VSG. You can store up to 250 subscriber
accounts on the VSG.
From the Main Menu screen, click Configuration, Subscriber Management and Add Subscribers. The Add
Subscribers screen varies depending on whether the billing mechanism is activated.
The Built-in Authentication management type supports Accumulation accounting method only (refer
to the Accounting Method section for more information).
6.2 Subscriber Management without Billing
The following sections describe the local subscriber account management without the billing function.
Figure 6-1 Subscriber Management Screen: No Billing
6.2.1 Editing Subscriber Account
Use the Add Subscribers screen to create and modify subscriber account information. You can create up to 10
subscriber accounts at a time.
Chapter 6
Local Subscriber Management