ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 100)

VSG-1000 Vantage Service Gateway
14-4 Configuration and Firmware Maintenance
Figure 14-7 Web Configurator: Utilities: Exporting Configuration File
Step 3. Select Export and enter the IP address of the computer running the TFTP server in the TFTP Server IP
Address field.
Step 4. In the Filename field, specify the name of the configuration file to be stored and click Apply to start the
file transfer process.
Step 5. When the file transfer is completed successfully, the Utilities Menu screen displays. The configuration
file should be stored in the location specified on the computer running the TFTP server.
14.4.2 Restore Configuration
This section shows you how to restore a previously saved configuration.
This function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
Step 1. Run a TFTP server program on a computer and specify the location for saving the configuration file and
set the communication mode.
Step 2. From the Main Menu screen, click Utilities and Import/Export Configuration. A screen displays as
shown next.
Figure 14-8 Web Configurator: Utilities: Importing Configuration File
Step 3. Select Import and enter the IP address of the computer running the TFTP server in the TFTP Server IP
Address field.
Step 4. In the Filename field, specify the name of the configuration file to import and click Apply to start the
file transfer process.
Step 5. When the file transfer is completed successfully, click Restart to reboot the VSG and make the changes
take effect.
Figure 14-9 Web Configurator: Utilities: Restore Configuration: Reboot