ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 79)

VSG-1000 Vantage Service Gateway
IP and MAC Address Pass Through 10-1
This chapter shows you how to configure IP and MAC address pass through.
10.1 Configuring IP and MAC Address Pass Through
You can set the VSG to allow the forwarding of packets from a specified LAN device, such as a file server or
computer, without prompting for a user name and password. You can specify up to 40 IP addresses and 10 MAC
addresses of LAN devices allowed to pass through the VSG. For example, in an airport VIP room, you can specify
the IP or MAC addresses of computers that subscribers can use without logging in.
From the Main Menu screen, click Configure, Pass Through IP & MAC. A screen displays as shown.
Figure 10-1 IP & MAC Address Pass Through
The following table describes the labels in this screen.
Table 10-1 IP & MAC Address Pass Through
LABEL DESCRIPTION
No. This read-only field displays the index number of the entry.
IP Address Enter the IP address of the device (in dotted decimal notation) whose packets are allowed to pass through the
VSG. For example, 10.59.1.10.
MAC Address Enter the MAC address of the device (in 6 hexadecimal pairs, for example, 00-50-BA-8D-22-96) whose packets
are allowed to pass through the VSG.
Apply Click Apply to save the changes back to VSG and go back to the Utility Menu.
Clear Click Clear to start configuring this screen again.
Home Click Home to go back to the Main Menu screen. The changes you made will not be saved if you have not
clicked Apply.
Chapter 10
IP and MAC Address Pass Through