ZyXEL Communications ZyXEL Vantage VSG-1000 - Manual (Page 88)

VSG-1000 Vantage Service Gateway
12-2 The SMT
Figure 12-2 SMT: Login Screen
The VSG automatically logs you out after ten (default) minutes of inactivity. Simply log back into
the VSG if this happens to you.
12.3 The SMT Main Menu Summary
The SMT main menu is shown next.
Figure 12-3 SMT: Main Menu
The following table describes the menu choices in this screen.
NUMBER MENU TITLE FUNCTION
1 System Configuration Use this menu to set up LAN IP address, DHCP settings, WAN port configuration and
general system setup.
2 Status Use this menu to view the current configuration of the VSG.
3 Utilities Use this menu to perform firmware upgrade and change login password.
4 Restart Use this menu to restart your VSG.
5 Logout Use this menu to log out of the SMT.
6 Factory Setting Use this menu to reset the VSG back to factory default settings.
12.4 Navigating the SMT Interface
Familiarize yourself with the SMT operations before you attempt to modify the configuration.
12.4.1 SMT Screen Breakdown
The following figure shows the breakdown of most SMT screens.
VSG-1000
(c) 2000-2003 ZyXEL Communications Corporation. All Rights Reserved.
Version 1.06
Username:
Password:
Main Menu
1)System Configuration
2)Status
3)Utilities
4)Restart
5)Logout
6)Factory Setting
Enter selection:
Enter a numeric between 1-6.