Xerox Digital copier printers - Manual (Page 53)

4
4-5 Scanning documents
Resampling—Select the resampling interpolation method to use. In general, you
should choose Photograph if you are scanning a continuous tone photographic image
and Offset Print or Copy if you are scanning a printed document. The Offset Print or
Copy mode takes slightly more time but reduces moiré patterns in scans.
Color Conversion—Select the color conversion to use: Calibrated RGB or Match
Copy (the default copier CMYK conversion). You should use Calibrated RGB if you
will be using EFICOLOR or if you may want to print the image to any other printer.
You should choose Match Copy to match colors in a copy from the glass as closely as
possible assuming that you are going to print the image to the same copier and you do
not want to use EFICOLOR.
3. Click Scan in the main window to acquire the scan.
The progress bar displays how much of the image has been processed. You can click
Cancel to cancel acquiring the scan.
When the scan is acquired, the scanned image is displayed in Photoshop.