Xerox Digital copier printers - Manual (Page 115)

A
A-2 Error Messages
Ld ___ in bypass The copier’s bypass tray is not loaded with the paper size
specified. The Fiery SI will print when the bypass tray is
loaded with the required paper.
Ld ___ trans bypass The copier’s bypass tray is not loaded with the
transparency size specified. The Fiery SI will print when
the bypass tray is loaded with the required transparency.
Load ___ paper The copier is not loaded with the paper size specified. The
Fiery SI will print when the copier is loaded with the
required paper. This message will also appear if you are
printing transparency interleave and do not have the
correct paper size loaded.
Ld ___ in tray 1 The copier’s tray 1 is not loaded with the paper size
specified. The Fiery SI will print when tray 1 is loaded
with the required paper.
Ld ___ in tray 2 The copier’s tray 2 is not loaded with the paper size
specified. The Fiery SI will print when tray 2 is loaded
with the required paper.
Ld ___ in tray 3 The copier’s tray 3 is not loaded with the paper size
specified. The Fiery SI will print when tray 3 is loaded
with the required paper.
No toner The toner for one of the colors has run out. Refer to the
copier display to determine which toner color is empty. If
more than one toner needs to be added, press and hold the
Stop icon on the copier for additional information.
Paper jam There is a paper jam in the copier. Open the copier doors
and check the locations indicated on the copier display.
The Fiery SI will resume printing when you have cleared
the paper jam and closed the copier doors.
Press “Clear All” Press the Clear All button on the copier.