Xerox Digital copier printers - Manual (Page 24)

1
1-9 Using the Control Panel
Shutting down the Fiery SI
You may need to shut down the Fiery SI for service. When you do so, fonts that have
been downloaded to the hard disk drive are not deleted. Print jobs in the Hold and
Printed queues and jobs that have been processed but not printed are not deleted and
are available for printing when you restart the Fiery SI.
T O SHUT DOWN THE F IERY SI:
1. Make sure that the Fiery SI is not receiving, processing, or printing a document.
Make sure that the status message on the Control Panel is Idle .
N OTE : If a job from the Print Queue is processing, it will continue processing and print
after the Fiery SI is restarted; if a job to the direct connection is processing, it will not
finish processing or printing.
2. Press the Menu button to display the Functions menu.
3. Scroll to the final screen and select Reboot Server.
You should always select Reboot Server before you turn the Fiery SI off to ensure that
no jobs are lost.
4. Switch off the Fiery SI when it restarts.