Xerox Digital copier printers - Manual (Page 45)

3
3-14 Printing with PC-Compatible Computers
Printing pages from the bypass tray
You can use the Fiery SI to print manually fed pages on the copier if you want to print
on a special paper or a transparency. You can use the Fiery SI to print on 16–24 pound
paper (60–90 gsm), thick paper (28–32 pound/105–120 gsm) or Xerox-recommended
transparencies from the bypass tray. You can also use the bypass tray for paper sizes
such as A6 and 11" x 18" (model 5750 only).
There are several ways to print manually fed pages:
• From the Control Panel, you can set Enable Bypass Tray as default to Yes to print all
jobs from the Bypass Tray unless another tray is specified.
• From within the Fiery XJ Spooler, select a job, select Override Print Settings and set
the Bypass Tray option to On.
• For many applications, you can use the following procedure and select Bypass Tray
in the Print or Page Setup dialog box.
T O PRINT PAGES USING THE BYPASS TRAY :
1. Make sure that the Use Bypass Tray option on the copier panel is set to No.
N OTE : If you select Bypass as your paper supply on the copier, it will put the copier in
Copier Mode and the copier will be unavailable for printing.
2. Insert the paper or transparencies in the bypass tray.
You can load up to 40 sheets.
3. Press the Clear All button on the copier.
4. From your application, select Bypass Tray as the Paper Source in the Page Setup or
Print dialog box.
If Interleaved mode is selected in the Print Options dialog box, one of the paper trays
must be loaded with a paper the same size and orientation as the transparencies in the
bypass tray.
5. Select the correct page size in the Page Setup or Print dialog box.
6. Click Print in your application.