ZyXEL Communications 10 - Manual (Page 82)

ZyWALL 10~100 Series Internet Security Gateway
5-14 WAN and Dial Backup Setup
Figure 5-8 Menu 11.4 – Remote Node Setup Script
The following table describes each field in Menu 11.4 – Remote Node Setup Script.
Table 5-7 Remote Node Script Menu Fields
FIELD DESCRIPTION EXAMPLE
Active Press [SPACE BAR] and then [ENTER] to select either Yes to enable
the AT strings or No to disable them. No
(default)
Set 1-6:
Expect Enter an Expect string to match. After matching the Expect string, the
ZyWALL returns the string in the Send field.
Set 1-6:
Send Enter a string to send out after the Expect string is matched. 0.0.0.0
5.11 Remote Node Filter
Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the value to
Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.
Menu 11.4 - Remote Node Script
Active= No
Set 1: Set 5:
Expect= Expect=
Send= Send=
Set 2: Set 6:
Expect= Expect=
Send= Send=
Set 3:
Expect=
Send=
Set 4:
Expect=
Send=
Enter here to CONFIRM or ESC to CANCEL: