ZyXEL Communications 10 - Manual (Page 305)

ZyWALL 10~100 Series Internet Security Gateway
System Maintenance & Information 23-5
23.3 Time and Date Setting
The Real Time Chip (RTC) keeps track of the time and date (Not available on all models). There is also a
software mechanism to set the time manually or get the current time and date from an external server when
you turn on your ZyWALL. Menu 24.10 allows you to update the time and date settings of your ZyWALL.
The real time is then displayed in the ZyWALL error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 23-6 Menu 24: System Maintenance
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and date
settings of your ZyWALL as shown in the following screen.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup
Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: