ZyXEL Communications 10 - Manual (Page 187)

ZyWALL 10~100 Series Internet Security Gateway
Introducing the ZyWALL Firewall 14-1
Chapter 14
Introducing the ZyWALL Firewall
This chapter shows you how to get started with the ZyWALL firewall.
14.1 Remote Management and the Firewall
When you configure remote management to allow management from the WAN, you still need to configure a
firewall rule to allow access. See the Remote Management chapter for details on remote management.
14.2 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your ZyWALL has to
offer. For this reason, it is recommended that you configure your firewall using the web configurator; see the
following chapters for instructions. SMT screens allow you to activate the firewall. CLI commands provide
limited configuration options and are only recommended for advanced users, please refer to the appendix of
firewall CLI commands.
14.3 Using ZyWALL SMT Menus
From the main menu enter 21 to go to Menu 21 - Filter Set and Firewall Configuration to display the
screen shown next.
Figure 14-1 Menu 21: Filter and Firewall Setup
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup