Zhone Technologies 600 - Manual (Page 99)

Server Cards 4-25
ATM Card ACS-ATM Card User Screens and Settings
Table 4-11. CBR Configuration Screen Actions
Table 4-12. CBR Configuration Screen Options and Defaults
Notes:
1. Will display user card slot when reserved from that user card.
2. The port will show port number when reserved from that user port.
3. casE1 is available when muser is selected in Legacy or when the WAN selected is an
E1 (CEPT) WAN.
STATE
The State setting determines whether the port is active or inactive. Set the State to stdby
(standby) for ports you are not using or have not yet configured. Set it to actv (active) for ports
that are ready for ATM traffic usage.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Redraws the screen.
Copy Copies the contents of the current column to the next column.
Perf Brings up the CBR Port Performance Data Screen.
< Scrolls left through the 96 CBR PVCs.
> Scrolls right through the 96 CBR PVCs.
Main Returns to the ACS-ATM Card Main Screen. If changes are made to settings
and not saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
LEGACY wan muser 1 w1-1
PORT n/a 1-8 2 n/a
TS table table
FORMAT unstr basic casT1 casE1 3 unstr
CELL FILL 1-47 47
CDV 1-128 1
CLI 1000-65535 1000
VCI 33-1023 33