Zhone Technologies 600 - Manual (Page 83)

Server Cards 4-9
ATM Card ACS-ATM Card User Screens and Settings
LOC NETMASK
The Local Netmask is used in conjunction with the Local IP Address to identify the IP network
for the ATM card. Any valid IP Netmask may be used. (For information regarding IP network
design, contact your system administrator.) The default is 0.0.0.0.
MGMT CONN
The Management Connection setting indicates if the ATM connection for management
purposes is a switched virtual circuit (using the FORE SPANS protocol) or a permanent virtual
circuit. The options are pvc and none. If set to none, all other Network Management functions
will not work.
MGMT VCI
The Management Virtual Channel Identifier is the VCI for the Permanent Virtual Connection
to the Network Management System. It is only supported when pvc is selected from the
MGMT CONN field above. The options are 33 to 1023.
IP-02 VCI
The IP-02 VCI parameter allows the user to specify a VCI on the ATM card that is different
from the Management VCI to be used as a remote network management channel. Each ATM
card can support up to 8 network management channels (MGMT VCI and IP-02 VCI through
IP-08 VCI), which are assigned from the CPU’s IP Routing Screen.
IP-03 VCI
The IP-03 VCI parameter allows the user to specify a VCI on the ATM card that is different
from the Management VCI to be used as a remote network management channel. Each ATM
card can support up to 8 network management channels (MGMT VCI and IP-02 VCI through
IP-08 VCI), which are assigned from the CPU’s IP Routing Screen.
IP-04 VCI
The IP-04 VCI parameter allows the user to specify a VCI on the ATM card that is different
from the Management VCI to be used as a remote network management channel. Each ATM
card can support up to 8 network management channels (MGMT VCI and IP-02 VCI through
IP-08 VCI), which are assigned from the CPU’s IP Routing Screen.