Zhone Technologies 600 - Manual (Page 193)

Server Cards 7-3
IMUX Card Inverse Multiplexer (IMUX) Card Settings
Table 7-1. IMUX Card Main Screen Options and Defaults
STATE
The State parameter shows the activity on this IMUX engine (port). The values are idle or
busy.
DIRECTION
The Direction parameter shows the direction of a busy circuit. The values are out (a call
originated from this location to another) or in (a call originated from another location).
WAN
The WAN parameter shows the WAN link used by the busy circuit. The values for this setting
are w1-1 through w4-2.
MAIN CHANNEL
The Main Channel parameter shows the timeslot on the WAN link shown on the previous
setting that is used for the call to the IMUX primary number or hunt number for this call.
Values for this setting are 1-24 for T1 systems or 1-31 for E1 systems. The value 99 is used
for unassigned engines.
N-CHANNELS
The N-Channels parameter shows the number of additional timeslots needed to complete the
IMUX call. The values for this setting are 1-23 for T1 systems and 1-30 for E1 systems. The
value 00 is used for unassigned engines.
Parameter User Options
STATE idle busy
DIRECTION out in
WAN w1-1 w1-2 w2-1 w2-2 w3-1 w3-2 w4-1 w4-2
MAIN CHANNEL 01-23 01-30 99
N-CHANNELS 01-23 01-30 00
BONDING MODE 00-01
LAST DISC. 01-12 00