Zhone Technologies 600 - Manual (Page 205)

Server Cards 7-15
IMUX Card Inverse Multiplexer (IMUX) Card Settings
Table 7-9. IMUX Call Screen Settings Options and Defaults
BONDING MODE
The Bonding Mode setting defines which end of the IMUX call will perform the
synchronizing tasks needed to complete the call. The options are mode0 (the end user
equipment will synchronize bandwidth) and mode1 (the terminating IMUX card will
synchronize bandwidth).
Almost all IMUX applications will use mode1 synchronization.
TXDELAY TIMER
The Timer (bothway) Delay setting defines the duration of time for the final delay equalization
acknowledgment before allowing the call to commence. The values (in milliseconds) are 50,
100, 250 and 500. This timer is used for mode1 calls.
TXINIT TIMER
The Timer (bothway) Initial Channel setting defines the duration of time necessary for
negotiation for the initial 56Kbps, 64Kbps or H0 (384Kbps) channel. The values (in
milliseconds) are 5000, 2500, 7500 and 10000. This timer is used for mode0 and mode1 calls.
TXADD01 TIMER
The Timer (bothway) Additional Channel setting defines the duration of time necessary for
additional 56Kbps, 64Kbps or H0 (384Kbps) channels to be connected. This value is often
called the "call-processing time." The values (in milliseconds) are 60000, 40000, 80000 and
120000. This timer is used for mode0 and mode1 calls.
Parameter User Options Default
BONDING MODE mode0 mode1 mode1
TXDELAY TIMER 50 100 250 500 50
TXINIT TIMER 5000 2500 7500 10000 5000
TXDISC TIMER 1000 500 1500 2000 1000
TCID TIMER 1000 2000 3000 4000 1000
TANULL TIMER 5000 2500 7500 10000 5000
TXDEQ TIMER 20000 10000 30000 50000 20000
TXFA TIMER 20000 10000 30000 40000 20000