Zhone Technologies 600 - Manual (Page 222)

8-14 Server Cards
Model No. Running Head IPR Card Configuration Screens and Settings IPR Card
Table 8-4. IPR 10B2 and 10BT Ethernet and Default IP
Option Settings and Defaults
STATE
Activates or deactivates Ethernet port. The settings are actv or stdby.
ENCAPSULATION
Ethernet encapsulation. The settings are Ether or 802.
IP INTERFACE
IP Interface name from IP Interface screen. This must be a valid IP interface.
IP MTU
IP MTU on Ethernet. The IP MTU can be between 64-1500.
RIP
RIP parameters. The default is R&T (Receive & Transmit). Other options are R, T, and none.
SH
Enables or disables split horizon on Ethernet. Options are yes or no.
Parameter User Options Default
STATE actv stdby stdby
ENCAPSULATION Ether 802 Ether
IP INTERFACE
IP MTU 64-1500 64-1500
RIP none R T R&T R&T
SH yes no yes
DEFAULT TYPE none statc dynam host none
DEFAULT GATEWAY n/a ipaddr n/a
PROXY HOST enabl dsable dsable