Zhone Technologies 600 - Manual (Page 100)

4-26 Server Cards
Model No. Running Head ACS-ATM Card User Screens and Settings ATM Card
LEGACY
This setting indicates the physical port(s) on the legacy side of the ATM module associated
with this ATM user port. The options are muser (for user cards) and wan (for individual WAN
links). If wan is chosen, another pop-up window will appear to allow the user to select which
WAN link to associate with this port. Valid selections are w1-1 to w4-2.
If the Legacy port is a single port, it must be configured on the user card screen. The user card
number will appear as U# (where # is the card slot number).
PORT
Identifies the port on the user card to expect legacy traffic. If a single user port was configured
on the associated user card screen, the user port number will appear. If wan or muser is
selected in the Legacy setting above, this option will show n/a.
TS
The Time slot setting identifies the time slots used by this port. If wan is chosen in the Legacy
setting above, this field will show table and time slots can be selected by using the table. If
muser is chosen in the Legacy setting above, TS can be set to the desired number of time slots
by using the arrow keys.
FORMAT
The Format setting determines the structure of the AAL1 frames. Refer to Figure 4-10 for the
proper Format settings to choose.
Figure 4-10. ATM Server Option Tree
CBR/AAL1
WAN
Unstrc cas-T1 basic cas-E1
muser