Zhone Technologies 600 - Manual (Page 192)

7-2 Server Cards
Model No. Running Head Inverse Multiplexer (IMUX) Card Settings IMUX Card
Note: If you have an Enhanced Bus-Connect system (25888 IMUX) and have WAN cards in
slots W-3 and W-4, the Inverse Multiplexer card will not work. This warning does not
apply to redundant or non-redundant WANs in slots W-1 and W-2.
7.2 Inverse Multiplexer (IMUX) Card Settings
7.2.1 IMUX Card Description (8880)
Similar to the ISDN card main screen, the parameters on the main screen of the IMUX card
are for information only, they cannot be changed. Figure 7-2 shows the IMUX card main
screen. Table 7-1 shows the settings and values.
7.2.2 IMUX Card Main Screen
Figure 7-2. The IMUX Card Main Screen