Zhone Technologies 600 - Manual (Page 169)

Server Cards 6-19
ACS-PRI/BRI Card ACS-PRI/BRI Card User Screens and Settings
Table 6-4. ACS-PRI/BRI Screen Menu of Actions
Action Function
Save Saves changes to settings.
Intf Install and change the Interface Identifications for the highlighted D
Channel.
Bmap Install and change all ISDN B Channels for the highlighted D Channel.
Shows a map of all timeslots in the system. See Assigning B Channels below.
sErv Specifies which type of billing services can be used by the highlighted D
Channel. Eight service types are available for each D Channel. Must have a
two digit address code 00-99. 24 characters are allowed. See Assignment of
Services below.
rOut Specifies routing profiles for all ISDN D Channels. See Routing of Incoming
Calls section below.
speciaL The Special Number table is a list of telephone numbers that will only be
routed to the default D channel trunk. See Special Numbers section below.
Trunk Displays the Trunk Routing screen. See the Trunk Routing section below.
rtYpe The Routing type allows users to select the routing pattern for each D
channel used by the system. See Routing Type section below
Dial Activates a remote VT-100 terminal session with a remote system unit. User
enters the phone number of the remote unit (see Remote Login Using the D
Channel later in this chapter).
dPcm This feature currently is not available for 5.0
Main Returns to the Call Status screen. If changes are made to settings and not
saved, the system will prompt you to save or lose changes.