Zhone Technologies 600 - Manual (Page 19)

Server Cards 1-3
ADPCM Card ADPCM Card User Screens and Settings
1.3 ADPCM Card User Screens and Settings
1.3.1 ADPCM Card Main Screen
You must configure the ADPCM card ports for operation. This is done from the ADPCM Card
Main Screen, which is shown in Figure 1-1. To go to this screen, highlight the ADPCM card
in the System Main Screen and press .
Figure 1-1. Typical ADPCM Card Main Screen
The bottom highlighted line of this screen shows several actions you can perform from the
screen. To perform an action, simply press the key indicated by the uppercase letter of the
desired action. For example, to save your configuration settings, press “s” to invoke the Save
command. Table 1-2 lists these actions.