Zebra Technologies 160S - Manual (Page 17)

Ribbon
Ribbon Width
Zebra recommends using ribbon at least as
wide as the media you are using to protect
the printhead from wear.
105Se 160S
Maximum 4.33" 110 mm 6.89" 175 mm
Minimum 0.94" 24 mm 2.0" 51 mm
Standard
Lengths
2:1 media to ribbon roll ratio 984 ft 300 m 984 ft 300 m
3:1 media to ribbon roll ratio 1476 ft 450 m 1476 ft 450 m
Roll size Inner diameter of core 1.0" 25.4 mm 1.0" 25.4 mm
Outside diameter of full roll of ribbon 3.2" 81 mm 3.2" 81 mm
Zebra Programming Language II (ZPL II ® )
Bar Codes
1-8 Zebra S-Series User’s Guide
n Downloadable graphics with data
compression
n
Bit image data transfer and printing,
including mixing of text and graphics
n Format inversion
n
Mirror image printing
n Four-position field rotation
(0°, 90°, 180°, 270°)
n
Bitmap and scalable fonts
n Programmable quantity with print pause
n Communicates in printable ASCII
characters
n
Controlled by a mainframe, minicomputer,
PC, or other data entry device
n Serialized fields
n
In-Spec OCR-A and OCR-B
n UPC/EAN [nominal 100% magnification
(6 dots/mm and 12 dots/mm only)]
n Code 11, Code 49, Code 93
n
Code 39 (Supports ratios of 2:1, 3:1, 5:2,
7:3)
n Code 128 (Supports serialization in
subsets B and C and UCC Case C Codes)
n
CODABAR (Supports ratios of 2:1, 3:1,
and 5:2)
n Industrial 2 of 5, Standard 2 of 5
n
Plessey
n MAXICODE
n UPC-A
n
PDF 417
n POSTNET
n
MSI
n
E/EAN-8, E/EAN-13, EAN
EXTENSIONS
n
Interleaved 2 of 5
n
3 of 9
n Data Matrix
16