Media – Zebra Technologies 160S User Manual
Page 16
Media
Media Specifications
105Se
160S
Total media width
Maximum 4.5"
114.3 mm
7.2"
182.9 mm
Minimum
0.75"
19.05 mm
2.0"
50.8 mm
Label length
Maximum
Refer to
on page 1-6.
Minimum
Tear-Off
0.63"
16.00 mm
0.63"
16.00 mm
Peel-Off
0.50"
12.8 mm
0.50"
12.8 mm
Rewind
0.50"
12.8 mm
0.50"
12.8 mm
Cutter
1.25"
31.75 mm
N/A
N/A
Total
thickness
(includes
liner)
Maximum (Printhead po-
sition may need to be ad-
justed above 0.01")
0.015"
0.381 mm
0.015"
0.381 mm
Minimum
0.0023"
0.0584 mm
0.0023"
0.0584 mm
Core size
3.0"
76.2 mm
3.0"
76.2 mm
Maximum roll diameter
8.0"
203.2 mm
8.0"
203.2 mm
Interlabel gap (0.115"/3 mm preferred) 0.079" - 0.157" 2 mm - 4 mm 0.079"- 0.157" 2 mm -4 mm
Maximum internal fanfold media pack
size (L x W x H)
8.0" x 7.2" x
6.2"
203.2 mm x
182.8 mm x
157.4 mm
8.0" x 7.2" x
6.2"
203.2 mm x
182.8 mm x
157.4 mm
Additional Specifications for Black-Mark Media (optional on 105Se)
Mark thickness (measur-
ing parallel to label/tag
edge)
Minimum
0.12"
3 mm
0.12"
3 mm
Maximum 0.43"
11 mm
0.43"
11 mm
Mark width (measuring
perpendicular to label/tag
edge)
Minimum
0.43"
11 mm
0.43"
11 mm
Maximum Full media width.
Full media width.
Mark-to-mark registration tolerance
+ /- 0.016"
+/- 0.4 mm
+/- 0.016"
+/- 0.4 mm
Mark location
Mark must be located on the inside of the media (closest to the
printers mainframe when loaded in the printer).
Mark density
> 1.0 ODU (Optical Density Unit)
Density of the back of the media on
which the black mark is printed
0.5 ODU maximum
Zebra S-Series User’s Guide
1-7
15