Zebra Technologies 160S - Manual (Page 15)

Printer Specifications
Printing Considerations
Specification 105Se 160S
Resolution (thermal transfer
or direct thermal)
203 dots per inch
(8 dots per mm)
Optional
152 dots per inch
(6 dots per mm)
Optional
300 dots per inch
(12 dots per mm)
203 dots per
inch (8 dots
per mm)
Dot size 0.00492"
(0.125 mm)
0.00656"
(0.167 mm)
0.0033" x 0.0039"
(0.084 x 0.100 mm)
0.00492"
(0.125 mm)
Maximum print width 4.09"
(104 mm)
4.09"
(104 mm)
4.09"
(104 mm)
6.30"
(160 mm)
Maximum
print length
Standard
memory
15"
(381 mm)
26"
(660 mm)
18"
(457 mm)
9.5"
(241 mm)
With 512 KB
add’l memory
39"
(991 mm)
39"
(991 mm)
N/A 25"
(635 mm)
Bar code modulus
(“X”) dimension
5 mil to 50 mil 6.6 mil to 66 mil 3.33 mil to 33.3 mil 5 mil to
50 mil
Thin film printhead with Energy Control
Print Speeds
Programmable constant printing speeds of 2" (51 mm), 3" (76 mm),
4" (102 mm), 5" (127 mm), and 6" (152 mm) per second.
The 105Se with optional 300 dots/inch resolution supports programma-
ble constant printing speeds of 2.4" (61 mm), 3" (76 mm), and
4" (102 mm) per second.
Media Handling
• Tear-off mode: Produced in strips.
• Peel-off mode: Requires Peel-Off option or Media Rewind option.
Labels are dispensed and peeled from the liner, and the liner is re-
wound internally.
• Rewind mode: Requires Media Rewind option. A full roll of printed
labels is rewound internally.
• Cutter mode: Requires Cutter Module option. Media cut after print-
ing; under software control.
1-6 Zebra S-Series User’s Guide
14