ZyXEL Communications ZyXEL Dimension GS-2024 - Manual (Page 87)

Chapter 8 VLAN
GS-2024 User’s Guide
87
Outgoing These are the egress ports. An egress port is an outgoing port, that is, a port through
which a data packet leaves. If you wish to allow two subscriber ports to talk to each
other, you must define the egress port for both ports. CPU refers to the Switch
management port. By default it forms a VLAN with all Ethernet ports. If it does not form
a VLAN with a particular port then the Switch cannot be managed from that port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 18 Advanced Application > VLAN: Port Based VLAN Setup (continued)
LABEL DESCRIPTION