ZyXEL Communications ZyXEL Dimension GS-2024 - Manual (Page 50)

Chapter 4 The Web Configurator
GS-2024 User’s Guide
50
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
Figure 16 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the Switch’s power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch’s storage that
remains even if the Switch’s power is turned off.
"
Use the Save link when you are done with a configuration session.
ARP Table This link takes you to a screen where you can view the MAC address – IP address
resolution table.
Configure Clone This link takes you to a screen where you can copy attributes of one port to
(an)other port(s).
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION