ZyXEL Communications ZyXEL Dimension GS-2024 - Manual (Page 165)

Chapter 22 Differentiated Services
GS-2024 User’s Guide
165
Figure 87 IP Application > DiffServ
The following table describes the labels in this screen.
Table 56 IP Application > DiffServ
LABEL DESCRIPTION
Active Select this option to enable DiffServ on the Switch.
DSCP to
802.1p
Mapping
0 … 63 This is the DSCP classification identification number.
To set the IEEE 802.1p priority mapping, select the priority level from the drop-down
list box.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.