Xilinx MIcroblaze Development Spartan-3E 1600E User Manual
Page 33
MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
31
UG257 (v1.1) December 5, 2007
Programming the FPGA, CPLD, or Platform Flash PROM via USB
R
Click Configuration Options as shown in
Figure 4-11
. Using the Configuration
Rate
drop list, choose 25 to increase the internal CCLK oscillator to approximately
25 MHz, the fastest frequency when using an XCF04S Platform Flash PROM. Click OK
when finished.
Figure 4-10:
Set Properties for Bitstream Generator
Figure 4-11:
Set CCLK Configuration Rate under Configuration Options
UG257_04_10_061206
UG257_04_11_061206