Xerox 432 - Manual (Page 96)

Page 3-36 Xerox Document Centre 440/432/430/426/425/420 User Guide
Transparency options
Off the feature is not available.
Blank Dividers places a blank sheet of paper between each transparency.
No Dividers prints transparencies with no dividers, Copy Sets can still be
selected.
Printed Dividers an additional paper copy is automatically inserted after each
transparency.
Copy Sets prints additional paper sets of the transparencies. Select Copy
Sets and use the number keypad to enter the quantity required.
HINT: If a paper tray has been loaded and the tray attributes
have been programmed it is not necessary to assign a tray for
transparencies. The DC440/432/430/426/425/420
automatically detects the tray that contains the
transparencies.
NOTE: To avoid overheated or distorted transparencies do not
copy onto transparencies without selecting Transparencies
first.
N Up (2 Up - DC426/420)
DC440/432/430/425 This feature prints two or four independent documents on to
one sheet of paper. The DC440/432/430/425 reduces/
enlarges the images as needed to print them either in
landscape or portrait orientation on one page based on the
paper supply selected.
DC426/420 this feature is available as 2 Up. It enables two independent
documents to be printed side by side on to one sheet of paper.
It reduces / enlarges the images as needed to display them in
landscape orientation on one page.