Xerox 432 - Manual (Page 406)

Page 12-10 Xerox Document Centre 440/432/430/426/425/420 User Guide
CAUTION: To avoid spills, do not remove the sealing tape
until the Copy/Print Cartridge is completely in place.
¾ Holding the cartridge by its
handle, slide it into the frame
in the machine. Let go of the
handle as you slide the Copy/
Print Cartridge all the way to
the back of the frame. It must
click into place.
¾ Pull the coloured tab to
remove the sealing tape from
the cartridge. It is located on
the front of the cartridge.
¾ Close the Left Front Cover.
NOTE: The Left Front Cover
will not close if the cartridge is
not completely in place.
¾ Close the Upper Left Cover.
IF FITTED
¾ Close the Duplex Module.
¾ Slide the Finisher and High
Capacity Feeder back in to
place.