Erase (dc440/432/430/425), Border erase (dc440/432/430/425), Erase (dc440/432/430/425) -32 – Xerox 432 User Manual
Page 328: Ge 11-32
Page 11-32
Xerox Document Centre 440/432/430/426/425/420 User Guide
Erase (DC440/432/430/425)
Programs the default settings for the Edge Erase and Border
Erase features. The factory default is off for all the erase
features with the erase values set to 0 inches.
Border Erase (DC440/432/430/425)
¾
If necessary, select
[Additional Setups].
¾
Select [Erase].
¾
Select [Border Erase] or
[Edge Erase] to change the
settings - a description of
each follows - or select [Off]
to turn this feature off.
¾
Make changes as required.
¾
Select [Save].
¾
Select [Border Erase].
¾
Use the scroll buttons to set
the default measurement for
Border Erase between 0 and
2 in.
¾
Select [Save].