Xerox 432 User Manual
Page 418
Page 13-6
Xerox Document Centre 440/432/430/426/425/420 User Guide
The machine did not enlarge an 8 1/2” x
11” document on to an 11” x 17”page
¾
11” x 17”paper can only be loaded in the
trays short edge feed. Load the 8 1/2” x
11”document short edge feed. The
machine cannot rotate an image on 11” x
17”paper. It only rotates images on to 8
1/2” x 11”long edge feed paper.
¾
Select a percentage for enlargement.
The machine displays a tray fault.
¾
Open the paper tray.
¾
Move the paper tray guides away from
the paper.
¾
Move the paper tray guides against the
paper so that they are just touching the
paper.
¾
Power the machine Off and then On.
Deformed transparencies
¾
Check to see if Transparencies is
selected on the touch screen. The
machine automatically adjusts for
different types of media. Paper can
tolerate more heat than transparencies.
¾
Use the Left Tray instead of the Center
Tray.
Annotation did not work
¾
Check features programmed. Annotation
cannot be used with N Up (2 Up on the
DC426/420), Greyscale copying
(DC426/420), Booklet Creation, Build
Job, uncollated copies, custom size
documents, or Bound Documents. Re-
program the job.
Machine does not edit
¾
Replace the editing marker.
Inserts have images printed on them
¾
Insert blank sheets of paper with the
documents to mark each location for an
insert.
Symptom
Recommendation