Xerox 575 - Manual (Page 98)

Dialing Methods
4-6 WorkCentre Pro 555/575
5. Using the Numeric Keypad, enter the Speed Dial number, then
press
Start.
after 2 seconds
…
The machine automatically dials the phone number, confirms the
connection, and sends the document.
One Touch Dialing
If you programmed a remote party’s number to a One Touch key, you
can dial that number by pressing the corresponding One Touch key.
To use this function, the One Touch number must be programmed in
the Phonebook (see “Pre-setting One Touch Numbers”). To link a
One Touch Key to a Speed Dial or Group Number see “Pre-setting
Speed Dial Numbers” or “Pre-setting Group Numbers” in Chapter 2.
To dial the remote station using One Touch dialing:
1. Load the document face down in the Document Support.
2. Select the desired Resolution and Contrast.
Speed dial: 001
XEROX
Doc. reading P001
Job number: 041
Jan-31 02:23pm 100%
Auto answer