Xerox 575 - Manual (Page 52)

Programming the Machine
2-34 WorkCentre Pro 555/575
Changing the Department Code Settings
The “Master Department Code” is required to add, change, or delete
the Department Code settings. This menu is not available to other
department codes.
To add or change the Department Code settings:
1. From the “Enter Dept. code” screen, enter the Master
Department Code, then press
Enter.
2. Press:
3. To add or change Dept. codes, press .
CAUTION
To disable the Department Control feature, press
, then press Exit or Stop to return to the
Standby Mode.
4. Enter the Department number to change, then press Enter.
Menu
2.No
Set dept. code
1.Yes
Dept. number
(1-50) [ ]
2.Modify
1.Delete
Dept. number 2
3.Retain