Xerox 575 - Manual (Page 156)

Polling
7-12 WorkCentre Pro 555/575
3. Enter the Polling start time and stop time, then press Enter.
(Using the up and down arrow keys, select the AM or PM.)
4. Using the up and down arrow keys, select the starting day and
stopping day of the week, press
Enter.
(Use the up and down arrow keys to select the day and the right
arrow key to change between the start day and the stop day.)
5. Using the dialing methods, enter the remote machine facsimile
numbers, and press
Enter if necessary.
6. Select the security option:
If a security code is required, press .
Then enter the Security Code obtained from the remote operator,
then press
Enter.
If no Security Code is required by the sending machine, press
.
7. Then press Enter.
Continuous Polling starts when the machine clock reaches the start
time.
Note: If using a security code for this poll operation, all machines
must be set with the same code.
Start/stop days
[Mon-Sat]
↑↓
Continuous poll
Enter fax number
2.No
Add security code
1.Yes
Security code
[ ]