Xerox 575 - Manual (Page 259)

WorkCentre Pro 555/575 B-3
Ordering Supplies Automatically
The Automatic Supplies Ordering feature allows you to have the
machine automatically send a report to a specified fax number
(normally a supplies center) when the machine is out of toner or the
drum life is low. This will ensure that supplies are available when
needed and will minimize ordering time.
Supplies can be ordered through the customer’s internal supplies
center, through a dealer or even through Xerox Supplies. This is
determined when the order center fax number is input. You may also
want the flexibility to make bulk orders in order to gain quantity
discounts when dealing directly with the Xerox supplies center.
Setting-up Automatic Supplies Ordering
Automatic Supplies Ordering is a three stage process, you need to
setup details of the destination where the order will be sent, you need
to set up details of the supplies to be ordered and you need to provide
your ordering details. Once you have completed the process, you can
print a copy of the order form.
Setting up the destination
To set the destination details:
1. Press:
Menu
4.Image print
3.Other information
2.Supplies
Supplies order setup
1.Destination setup