Xerox 4508 - Manual (Page 28)

U s i n g t h e F r o n t C o n t r o l P a n e l
3-6 ❖ D o c u P r i n t 4 5 0 8 U s e r G u i d e
Resetting the
Printer
This function resets the printer to the original factory defaults.
Press the key to turn the printer off-line. Hold down the key
for four seconds (until all LEDs are blinking). All data in the
printer’s memory is cleared. This will also restore user default
settings for printer preferences without clearing permanent
fonts and macros.
Printing the
Self Test Pages
You can view the printer’s status information and available
fonts through the Self Test Page. This function is only
available when the printer is ON-LINE and the printer has no
data to print.
1 Make sure the READY LED is on, and all other LEDs are off.
2 Hold down the key for four seconds.
3 Self Test sheets will be printed: one PCL 5e Configuration
sheet and two PCL 5e Font List sheets.
Configuration Sheet: Provides all printer setup parameters.
Font List Sheets: Provide listings of all resident printer fonts.
4508-c03.frm Page 6 Wednesday, May 22, 1996 6:55 AM