Xerox 4508 - Manual (Page 14)

S e t t i n g U p t h e P r i n t e r
2-4 ❖ D o c u P r i n t 4 5 0 8 U s e r G u i d e
Environment Place the printer in a well-ventilated room where:
• Room temperature is 50° to 91°F (10° to 32.8°C).
• Relative humidity is 20% to 80% with no condensation.
• There are no abrupt temperature or humidity changes.
• There is no exposure to direct sunlight, chemicals or
vibration.
Safety Precautions • Keep the printer away from water.
• Do not place any objects on top of the printer.
Unpacking
the Printer
1 Set the box on a sturdy, flat, smooth surface. Remove the
“Open Me First” envelope from the box.
2 Remove the User Guide, Power Cord, and Diskettes.
3 Remove the printer from its box.
Do not attempt to remove the printer by lifting it using
the packaging material. Place one hand under the front
of the printer and one hand under the back of the
printer and lift the printer out along with the
packaging material.
4 Remove the outer packing material from the printer.
5 Remove the tape at the front side of the printer.
4508-c02.frm Page 4 Thursday, June 6, 1996 12:04 PM