Xerox 4508 - Manual (Page 25)

U s i n g t h e F r o n t C o n t r o l P a n e l
C h a p t e r 3 : U s i n g t h e F r o n t C o n t r o l P a n e l ❖ 3-3
Front Panel
Key and LED
Functions
There are four key functions. The key function is determined
by the current printer’s state. For instance, holding the key
down for four seconds with READY LED ON causes three Self
Test pages to be printed. Holding the key down for four
seconds with the READY LED blinking causes the printer to
print any data remaining in the printer’s memory.
Key Functions
On/Off-line Pressing the key toggles the printer’s on-line
and off-line state.
Self Test When the printer is on-line and all the other
LEDs are off, hold down the key for four
seconds (until all LEDs are blinking). Three
Self Test sheets will be printed.
Form Feed When the printer is on-line and the READY
LED is blinking, hold down the key for four
seconds (until all LEDs are blinking). The
printer will print any data remaining in the
printer memory.
Reset Press the key to turn the printer off-line.
Hold down the key for four seconds (until all
LEDs are blinking). User default reset causes
the printer to clear all data from the printer’s
memory except permanent fonts and
macros, and then restore the user default
settings.
Note
For all these functions, if the key is pressed for four seconds,
all the LEDs start blinking until the key is released.
4508-c03.frm Page 3 Wednesday, May 22, 1996 6:55 AM