ZyXEL Communications P-660HN-TxA - Manual (Page 77)

Chapter 6 WAN Setup
P-660HN-TxA User’s Guide
77
6.2.1 Advanced Internet Access Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the Internet Access Setup screen. The screen
appears as shown.
Figure 31 Network > WAN > Internet Access Setup: Advanced Setup
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Select Keep Alive when you want your connection up all the time.
The ZyXEL Device will try to bring up the connection automatically if it
is disconnected.
Connect on
Demand Select Connect on Demand when you don't want the connection up
all the time and specify an idle time-out in the Max Idle Timeout
field.
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which means
the Internet session will not timeout.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 16 Network > WAN > Internet Access Setup (continued)
LABEL DESCRIPTION