ZyXEL Communications P-660HN-TxA - Manual (Page 208)

Chapter 19 System Settings
P-660HN-TxA User’s Guide
208
The following table describes the labels in this screen.
19.3 The Time and Date Screen
Use this screen to configure the ZyXEL Device’s time based on your local time
zone. To change your ZyXEL Device’s time and date, click Maintenance >
System > Time and Date. The screen appears as shown.
Figure 100 Maintenance > System > Time and Date
Table 71 Maintenance > System > General
LABEL DESCRIPTION
Password
Admin
Password
Old
Password
Type the default password or the existing password you use to access the
system in this field.
New
Password
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the
ZyXEL Device.
Retype to
confirm
Type the new password again for confirmation.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.