ZyXEL Communications P-660HN-TxA - Manual (Page 24)

Chapter 1 Introduction
P-660HN-TxA User’s Guide
24
3
Select your country from the Channel Selection list. See Section 8.2 on page
105 for details.
4
Click Apply to save your changes.
5
Finally, open the Internet and Wireless Configuration wizards to set up your
network. See
Chapter 5 on page 59 .
1.5.1 Using the WPS/WLAN Button
By default, the wireless network is turned off on the ZyXEL Device. To turn it on,
simply press the WPS/WLAN button on top of the device for 1 second. Once the
WPS/WLAN LED turns green, the wireless network is active.
You can also use the WPS/WLAN button to quickly set up a secure wireless
connection between the ZyXEL Device and a WPS-compatible client by adding one
device at a time.
To activate WPS:
1
Make sure the POWER LED is on and not blinking.
2
Press the WPS/WLAN button for five to ten seconds and release it.