1 no security – ZyXEL Communications P-660HN-TxA User Manual
Page 106
Chapter 8 Wireless LAN
P-660HN-TxA User’s Guide
106
The following table describes the labels in this screen.
8.2.1 No Security
In the Network > Wireless LAN > AP screen, select No Security from the
Security Mode list to allow wireless devices to communicate with the ZyXEL
Device without any data encryption or authentication.
Table 26 Network > Wireless LAN > AP
LABEL
DESCRIPTION
Wireless Setup
Enable
Wireless LAN
Click the check box to activate wireless LAN.
Channel
Selection
Select the country in which your ZyXEL Device operates. Channels
available vary according to the country you select. Set the operating
channel manually by selecting a channel from the Channel Selection list
or use Auto Channel Select to have it automatically configured.
Common Setup
Network
Name (SSID)
The SSID (Service Set IDentity) identifies the service set with which a
wireless device is associated. Wireless devices associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the ZyXEL
Device’s SSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the
ZyXEL Device’s new settings.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Security
Mode
See the following sections for more details about this field.
MAC Filter
This shows whether the wireless devices with the MAC addresses listed are
allowed or denied to access the ZyXEL Device using this SSID.
Edit
Click this to go to the MAC Filter screen to configure MAC filter settings.
See
for more details.
QoS
Select this check box to activate Quality of Service (QoS).
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced
Setup
Click this to display the Wireless Advanced Setup screen and edit more
details of your WLAN setup. See
details.