1 more ap edit – ZyXEL Communications P-660HN-TxA User Manual
Page 114
Chapter 8 Wireless LAN
P-660HN-TxA User’s Guide
114
8.3.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the
More AP screen. The following screen displays.
Figure 51 Network > Wireless LAN > More AP: Edit
The following table describes the fields in this screen.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 33 Network > Wireless LAN > More AP
LABEL
DESCRIPTION
Table 34 Network > Wireless LAN > More AP: Edit
LABEL
DESCRIPTION
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which
a wireless device is associated. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the
ZyXEL Device’s SSID or security settings, you will lose
your wireless connection when you press Apply to
confirm. You must then change the wireless settings of
your computer to match the ZyXEL Device’s new settings.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame
so a station cannot obtain the SSID through scanning using a site
survey tool.
Security Mode
See
for more details about this field.
MAC Filter
This shows whether the wireless devices with the MAC addresses
listed are allowed or denied to access the ZyXEL Device using this
SSID.
Edit
Click this to go to the MAC Filter screen to configure MAC filter
settings. See
for more details.