ZyXEL Communications P-660HN-TxA - Manual (Page 118)

Chapter 8 Wireless LAN
P-660HN-TxA User’s Guide
118
Click Network > Wireless LAN > WDS. The following screen displays.
Figure 54 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN > WDS
LABEL DESCRIPTION
WDS Security Select the type of the key used to encrypt data between APs. All the
wireless APs (including the ZyXEL Device) must use the same pre-
shared key for data transmission.
The option is available only when you set the security mode to WPA(2)
or WPA(2)-PSK in the Wireless LAN > AP screen.
TKIP Select this to use TKIP (Temporal Key Integrity Protocol) encryption.
AES Select this to use AES (Advanced Encryption Standard) encryption.
# This is the index number of the individual WDS link.
Active Select this to activate the link between the ZyXEL Device and the peer
device to which this entry refers. When you do not select the check box
this link is down.
Remote Bridge
MAC Address Type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
PSK Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII
characters (including spaces and symbols).
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.